| 1 |
Apply any standard grip tape to
shaft. Use enough tape to cover the length of the grip and extend the tape 1/4" over
butt end of the shaft. |
 |
| 2
|
Spray a small amount of
HF-100
on the grip tape. |
 |
| 3
|
Spray a small amount of
HF-100
into the grip. |
 |
| 4 |
Install the grip by pushing it
over the taped end of the shaft. |
 |
| 5 |
Wipe off excess HF-100 with a
dry cloth. |
 |
